1G Copper SFP with Hi-Pot Isolation_Hi-Pot Protection Solution

Home > Products > Industrial Networking Solutions > Hi-Pot Protection Solution > 1G Copper SFP with Hi-Pot Isolation

1G Copper SFP with Hi-Pot Isolation

Description

The PT4-C0-7D13x-A3 supports both SGMII and SerDes. The 1000BASE-T copper small from pluggable (SFP) transceiver is based on the SFP multi source agreement (MSA). The PT4-C0-7D13x-A3 shall support both RX_LOS pin for link indication and 1000BASE-X auto-negotiation.

It is also supporting DDM (Temperature and Voltage) to monitor module via I2C. The transceiver is compliant to Hi-POT test AC1500V / DC2250Vand RoHS. Its transmission distance at 1Gbps is up to 100m.

1G Copper SFP with SyncE and PTP

10/100/1000BASE-T IEEE 802.3 compliant
Compliant to Hi-POT test AC1500V / DC2250V
Transmission distance at 1Gpbs is up to 100m
Compact RJ45 connector
Case temperature range: -40°C ~ +85°C or 0°C ~ +70°C
Low Power Dissipation: Maximum 1.1W
Metal enclosure, low EMI
Access to Physical Layer IC via 2-wire Serial Bus
Support A0 write protection and RX_LOS
Wake on LAN (WOL) event detection
RoHS compliant

10/100/1000Mbps Ethernet over copper
Distributed multi-processing
High speed I/O for file server or high-end workstation
Switch/Router to Switch/Router Link
Hi-pot environment (e.g. Power Plant)

Part Number	Operating Temperature	MAC Interface	High-PoT Test
PT4-C0-7D13K-A3	0℃ ~ +70℃	SerDes / SGMII	Passed
PT4-C0-7D13L-A3	-40℃ ~ +85℃	SerDes / SGMII	Passed

** Please feel free to contact info@opto-media.com if any other requirements.

Back to List Back to Top